Search
Close this search box.

XPOR- LOCAL AREA NETWORK TRAINER

Key Feature:

FEATURES

  • XPOR-LAN offers comprehensive experiment set up consisting of 4 nodes explaining various physical topologies of LAN viz; Token Ring, Token Bus, Ethernet (CSMA/CD), Modbus etc. & variety of protocol like TCP, IP, HTTP, FTP, SMTP, Wireless LAN (802.11) etc.
  • Various Protocol demonstrator through error generation facility sans socket programming by using Network Protocol Analyzer Software.
  • Set of Users Guide provided with each unit.
  • Table top setup made using light but sturdy Aluminum profile (4X2) Rack complete with cables, connectors, optionally external USB to RS232 converter is Provided
  • One Lab PC with serial USB required for monitoring by user but not in scope of supply.
  • Useful for Post Graduate projects and research purpose.

Testing & Measuring Instruments: For condition monitoring and various other applications in power generation, transmission and distribution utilities and by railways, high voltage R&D laboratories, steel plants, motor and transformer manufacturers, repairers and re winders and by public and private sector industries, etc.

Turnstiles and Barriers: Turnstiles and Barriers for access and entrance control applications for high security installations, corporate buildings, industries, subway metro systems, stadiums, airports, etc.

Metal Detectors: Door frame and hand-held metal detectors for security and pilferage control applications for police departments, armed forces, paramilitary forces, airports, railways, nuclear, petroleum, banks and other high security installations, corporate buildings and major public and private sector industries and organizations, etc.

Technical Education Laboratory Trainer Kits: Trainer kits and measuring instruments specially designed for use in engineering colleges, polytechnics and technical training institutions to impart theoretical and practical training to students.

Types of LAN IEEE CSMA/CD (802.3) Token Ring (802.5) Token Bus (802.4) Modbus (Industrial

LAN)

Port Ethernet RS232 RS485 RS485
Connector RJ45 9 pin D type (M) 2 pin relimate 2 pin relimate
Cable 5 or 8 port LAN switch with 5 straight CAT5 UTP cable + 1 cross cable (half length) 2 meter each. 9 pin D (F-F) straight cable 5 nos(0.75mx4 nos,1.5 m x 1nos ) 9 pin D (F-F) straight cable 5 no’s (0.75mx 4 nos,1.5 m x1nos) with RS232 to RS485 converter for PC connectivity
Mode Star, 4 nodes (Default)or 6

(as per order) client nodes with PC as user/ monitoring (PC) node.

Physical ring, logical ring, Full duplex, Token passing of 4 nodes(Default)or 6(as per order) with PC monitoring Physical bus, logical ring, Half duplex, Sliding, Token passing of 4 nodes (Default)or 6(as per order) with PC monitoring Master-Slave half duplex, Stop & wait of 4 nodes (Default)or 6(as

per order), one user

(PC) mode

PC Software Network Protocol Analyzer Network monitor MODSCAN
PC Hardware Any lab PC with (P4/XP, WIN7/8/10), CDROM, COM Port and one Ethernet port needed (PC is not in scope of supply).
Node Hardware a) Embedded Controller device: 89C668 operating @ 16MHz. On chip RAM: 8 KB, Flash / EEPROM: 64KB. b) Serial port (RS232C) 9 pin D (M). c) In built USB to serial converter, d) Display: 20X4 LCD(Backlit), e) General Purpose SMD bicolor (green, red) 8X2 LEDs & 8 SMD

Push button switches / DIP switches, f) Power (SMPS): 5V/2.5Amp SMPS with RCA plug. SMPS. AC I/P230Vac +/-10% / 50Hz x 4 Nos., g) USB to Serial interface using CP2102, h) Variable Slow Clock (2 Hz to 64Hz), i) 3 numbers of SPDT switches for selection of communication between PC, NIC & ECU.

Node Software TCP/IP stack and serial command monitor written in ‘C’ Embedded program written in C illustrating particular Ring/Bus topology & token of 32 byte. Embedded

program written in C

Network interface card (NIC) Ethernet piggyback module with RJ45 connector. Built in RS232 I/F 9 pin D (M) connector RS485 piggyback module with 2 pin bus connectors.
Experiment

topics / software

(CSMA/CD)

a) Setting of IP, MAC for each node. b) Protocols-ICMP (ping), ARP, UDP, HTTP (Web page), SMTP, FTP, TELNET using hyper terminal Winsock, DNS, IP aliasing, node to node communication. c) Error generation under ARP, UDP, IP ban. d) Error generation and selective repeat under ICMP,

Variable Packet Size (Upto1320Bytes), Inter-packet delay (1-60Sec), number of repetitions (Unto 60), Packet error Type (0 to 60). e) Encryption and Decryption. f) Downloading of web page showing IP, MAC address of node, showing frequency of variable Slow Clock of that particular node on web page, uploading enquiry form under HTTP protocol. g) Wireless communication between PC to node, Node to PC and Mobile (Ad-hoc network) using Wi-Fi router. h) Optionally experiments with 6 nodes need extender serial mux panel, cables set etc. I) Separate exits. for token ring, bus & MODBUS.

Hardware Network

Lab Tool Kit

(Optional)

DMM, Drill Machine with bits, Small nose Plier, Stripper, Cutter, Blade Knief, Solder Gun with metal & Flux, LAN cable tester RJ45 + RJ11, LAN wire cutter & crimper (each 1 No.)
General Operating Temp– 0 to 500C, Power–230VAC+/-10% / 50Hz, Dimension / Wt– 960mm (L) x 300mm (W) x 545mm (H) / Net Wt. 30 Kg. Gross Wt. = 42 kg.

Our Location

No. 10 Jalan Besar, #15-01A, Sim Lim tower, Singapore 208787
Tel: +6582987190
Email: info@armortech.sg

Social Media

Designed @ Whisperage.com