Search
Close this search box.

Armor OPS PC for i5 / i7 – 12th

Key Feature:

  • Processor : Intel  ®  12th/13th Core I3/I5/I7 Mobile Processor
  • Display chip: Intel  ® HD Graphics  Nuclear display
  • Memory : 1 * SO-DIMM supports DDR4 2133/2400/2666/320MHz MAX: 32G
  • Storage : 1*SATA
  • power suppl: DC_JACK 12Vy 
  • Processor  Support Intel  ®  12th Core I5/I7 Mobile Processor
    Display chip  Intel  ® HD Graphics  Nuclear display
     

    display output 

    IO Port:    HDMI+DP+Type-C_DP OPS Port :HDMI+DP

    [Maximum resolution: HDMI support]  4096×2304@60Hz  DP support  7680×4320@60Hz  ]

    Memory  1 * SO-DIMM supports DDR4 2133/2400/2666/320MHz MAX: 32G
    storage  1*SATA

    1 * M.2 M Key 2280 solt supports NVMe/SATA protocol [switched via JMP]

    Expansion slot  1*M.2 E Key 2230 solt
    audio frequency  1*Realtek ACL897 High Definition Audio Driver
    network  1 * Realtek RLT8111H Gigabit Ethernet Card [optional dual network]
    USB  6*USB2.0 4*USB3.2
    I/O chip  ITE8613E
    BIOS  AMI BIOS
    power supply  DC_JACK    12V
    Cooling system  Comes with CPU heatsink [Built in: 1 * SYS-FAN 1x3Pin 1 * CPU_SAN 1x4Pin]
    environment  Work: 0~60 ℃

    Storage: -20 ℃~75 ℃ 0%~95% relative humidity,

    no condensation

    Processor  Support Intel  ®  12th/13th Core I3/I5/I7 Mobile Processor
    Display chip  Intel  ® HD Graphics  Nuclear display
     

    display output 

    IO Port:    HDMI+DP+Type-C_DP OPS Port :HDMI+DP

    [Maximum resolution: HDMI support]  4096×2304@60Hz  DP support  7680×4320@60Hz  ]

    Memory  1 * SO-DIMM supports DDR4 2133/2400/2666/320MHz MAX: 32G
    storage  1*SATA

    1 * M.2 M Key 2280 solt supports NVMe/SATA protocol [switched via JMP]

    Expansion slot  1*M.2 E Key 2230 solt
    audio frequency  1*Realtek ACL897 High Definition Audio Driver
    network  1 * Realtek RLT8111H Gigabit Ethernet Card [optional dual network]
    USB  6*USB2.0 4*USB3.2
    I/O chip  ITE8613E
    BIOS  AMI BIOS
    power supply  DC_JACK    12V
    Cooling system  Comes with CPU heatsink [Built in: 1 * SYS-FAN 1x3Pin 1 * CPU_SAN 1x4Pin]
    environment  Work: 0~60 ℃

    Storage: -20 ℃~75 ℃ 0%~95% relative humidity,

    no condensation

     

     

     

     

     

    Rear I/O panel 

    PWERBT: Power on/off button
    Power_SED+HDD_LED: [Power_SED green constantly on] [HDD_LED red flashing]
    USB3.2*2: [Gen2    MAX :10Gbps]
    USB2.0*2
    USB2.0*2
    RJ45
    Type-C:[DP+USB3.2]
    DP
    HDMI
    AUDIO: [Pink MIC Green Line-IN]
    REC_ST: [One click restore in conjunction with software]
    JUSB_POWER  1x3Pin Header [JMP default 1-2=VCC5 switch 2-3=5VSB]
    F_PANEL  1x3Pin Header [Short circuit 1-2=trigger power on short circuit 2-3=restart reset]
    BUZZER  Buzzer
    SYS_FAN  1x3Pin Wafer SYS_FAN Connector
    AT_ATX1  1x3Pin Header [JMP default 1-2=disable power on auto start switch 2-3=enable power on auto start]
    JCMOS  1x3Pin Header [JMP default 1-2 switch 2-3=CLR_CMOS]
    JCOM1  2×5:9Pin Header RS232
    SW2  2X3:6Pin Header [default 1-3, 2-4=JCOM1 switch 3-5, 4-6=OPS Port (RX TX)]
    SW4, SW3  2X3:6Pin Header [default 1-3, 2-4=M.2 Mkey: SATA protocol switching 3-5, 4-6=NVMe protocol]
    HDD_PWR1  1x4Pin Wafer [powered by external SATA hard drive]
    SATA1  SATA3.0
    DC_IN  DC power supply: 12V/19V
    CPU_FAN  1x4Pin Wafer CPU_FAN Connector
    OPS Port  JATEX25-80Pin Open Plug and Unplug
    M.2 M Key  M. 2 M Key 2280 Solt [Default SATA mode switch SW4 SW3JMP switch NVMe mode]
    M.2 E Key  M. 2 E Key 2230 Slot supports WiFi+Bluetooth module
    SO-DIMM  SO-DIMM DDR4 Solt supports DDR4 2133/2400/2666/320MHz MAX: 32G
    Formation number signal describe Formation number signal describe
    one DP_TXN3 DisplayPort output forty-one NC
    two DP_TXP3 DisplayPort output forty-two NC
    three GND Grounding forty-three NC
    four DP_TXN2 DisplayPort output forty-four NC
    five DP_TXP2 DisplayPort output forty-five NC
    six GND Grounding forty-six NC
    seven DP_TXN1 DisplayPort output forty-seven NC
    eight DP_TXP1 DisplayPort output forty-eight NC
    nine GND Grounding forty-nine NC
    ten DP_TXN0 DisplayPort output fifty SYS_FAN_TACH System controls fan output
    eleven DP_TXP0 DisplayPort output fifty-one UART_TXD UART3.3V output
    twelve GND Grounding fifty-two UART_RXD UART3.3V input
    thirteen DP_AUXN I/O fifty-three GND Grounding
    fourteen DP_AUXP I/O fifty-four StdA_SSRX- USB 3.0 input
    fifteen DP_DET DisplayPort input fifty-five StdA_SSRX+ USB 3.0 input
    sixteen GND Grounding fifty-six GND Grounding
    seventeen HDMI_CLK_N DisplayPort output fifty-seven StdA_SSRX- USB 3.0 input
    eighteen HDMI_CLK_P DisplayPort output fifty-eight StdA_SSRX+ USB 3.0 input
    nineteen GND Grounding fifty-nine GND Grounding
    twenty HDMI_DATA_N0 DisplayPort output sixty USB_PN USB I/O
    twenty-one HDMI_DATA_P0 DisplayPort output sixty-one USB_PP USB I/O
    twenty-two GND Grounding sixty-two GND Grounding
    twenty-three HDMI_DATA_N1 DisplayPort output sixty-three USB_PN USB I/O
    twenty-four HDMI_DATA_P1 DisplayPort output sixty-four USB_PP USB I/O
    twenty-five GND Grounding sixty-five GND Grounding
    twenty-six HDMI_DATA_N2 DisplayPort output sixty-six USB_PN USB I/O
    twenty-seven HDMI_DATA_P2 DisplayPort output sixty-seven USB_PP USB I/O
    twenty-eight GND Grounding sixty-eight GND Grounding
    twenty-nine HDMI_SDA I/O sixty-nine AZ_LINEOUT_R Audio_Sch output
    thirty HDMI_SDL I/O seventy AZ_LINEOUT_L Audio_Lch output
    thirty-one HDMI_HPD DisplayPort input seventy-one NC
    thirty-two GND Grounding seventy-two GND Grounding
    thirty-three AD_IN_OPS Power Supply seventy-three PS_ON# Plug and unplug signal to enable input
    thirty-four AD_IN_OPS Power Supply seventy-four STATUS Normal power output (oc)
    thirty-five AD_IN_OPS Power Supply seventy-five GND Grounding
    thirty-six AD_IN_OPS Power Supply seventy-six GND Grounding
    thirty-seven AD_IN_OPS Power Supply seventy-seven GND Grounding
    thirty-eight AD_IN_OPS Power Supply seventy-eight GND Grounding
    thirty-nine AD_IN_OPS Power Supply seventy-nine GND Grounding
    forty AD_IN_OPS Power Supply eighty GND Grounding
    DP  1*DP Display Port
    HDMI  1*HDMI Display Port
    USB3.2  1*USB3.2 Gen2
    USB2.0  2*USB2.0
    SYS_FAN_TACH  System fan control
    UART  UART3.3V output TX RX
    PS_ON#  Plug and unplug signal to enable input
    STATUS  Normal power output (OC) detection

    Our Location

    No. 10 Jalan Besar, #15-01A, Sim Lim tower, Singapore 208787
    Tel: +6582987190
    Email: info@armortech.sg

    Social Media

    Designed @ Whisperage.com