- Power Supply Unit
Fixed DC power supply
-Output voltage : +5V, -5V, +12V, -12VMax.
-output current : +5V/3A, -5V/0.3A, +12V/1.5A, -12V/0.3A
-With output overload protection
- Interface Port
-USB interface : Type B
- D/A Converter : 1 x 12-bit DAC
-Analog output & control
-OUT+ : +DC OFFSET 0V ~ +4.096V unipolar
-OUT- : -DC OFFSET 0V ~ – 4.096V unipolar
-OUT BP : DC OFFSET -2.048V ~ +2.048V bipolar
- Preset Level
-Max. value : 4095
- Status Display & DCV
-Input voltage measurement
-Range : 2000mV, 20V
-Accuracy : ±0.05% of reading + 4 counts
-Input impedance : 10MΩ
-Display : 4 ½ digits
- Mode Selector
-Manual / single-chip
- Buzzer
Input signal voltage : +12V
● Micro controller Signals -5 Control line outputs
● Model Holder : X4
● Potentiometer : 100KΩ B-type
● Comparator V-,V+ input, Vo output
● Differential amplifier V-,V+ input, Vo output
● Instrumentation amplifier V-,V+ input, Vo output, adjustable gain
Experiment Modules:
● Using 2mm plugs and sockets
● Comprehensive experiment manual
● Modules secured in plastic housings
● Connected by 2mm-2mm test leads
● Dimension : 255 x 165 x 30mm
● Circuit symbols, blocks and components printed on the surface of each module
● Power supplied from KL-61001B main unit
Graphic User Interface Software System Requirements:
– PC: 1GHz or faster 32-bit (x86) or 64-bit (x64) processor,
1GB RAM, 1 GB more free disk space
– Operating System : XP/ Vista/ 7/8/10
Specification & Feature:
● Real time acquire signal
● Adjustable acquire frequency
● Current, Min and Max value displayed
● Data save, load and print function
● X-axis : TIME/DIV ,Y-axis : VOLT/DIV
● Storage format : Excel format
List of Modules
●FT-23200A
1. Photo transistor
2. Photo interrupter
3. Magnetic (hall-effect) ~ digital
4. Magnetic (hall-effect) ~ analog
- FT-23201A
1. Pyroelectric detector
2. Reed switch
3. Thermistor
4. Mercury switch
- FT-23202A
1. Limit switch
2. Vibration switch
3. Condenser microphone
4. Dynamic microphone
- FT-23203A
1. Gas / smoke sensor
2. Ethanol sensor
- FT-23204A
1. IC (AD590) temperature sensor
2. Humidity sensor
– Humidity transducer rated voltage : 1 Vp-p AC
– Frequency range : 100Hz ~ 10KHz
– Temperature range : 0°C ~ 60°C
– Humidity range : 20%RH ~ 90%RH
– Impedance : 13KΩ (70%RH at 25°C)
- FT-23205A
1.Infrared TX / RX sensor
-.Infrared transmitter
Emission intensity :
:12mW/sr (I = 50mA)
: Emission wavelength :
: 940nm (IF = 50mA)
-Infrared receiver :
Sensitivity wavelength : 1000nm
2.Ultrasonic TX / RX sensor Norminal frequency : 40KHz
- FT-23206A
1. Pressure sensor
0-7 psi to 0-30 psi pressure ranges
2. Strain gauge
-Maximum payload : <5kg
-Teminal resistance : 350 ± 50Ω
- FT-23207A
1. Hall current sensor
-Nominal current : ±3A
-Current range : ±9A
-Output voltage : ±4V, RL = 10 k Ohms
2. Proximity sensor
– Operation voltages : 10 ~ 30V DC
– Short circuit protection
- FT-23208A
1.CDS sensor
2.Photovoltaic sensor
-Photovoltaic transducer open voltage = 2V
-Photovoltaic transducer close current = 0.06 μA/lx
- FT-23209A
1. V/F converter
-Input voltage : +10mV ~+10V
-Output frequency : 5Hz ~ 5KHz, 10Hz ~10KHz
- FT-23210A
1. F/V converter
-Input frequency : 0 ~ 4.3KHz ( ±0.2Vp ~ ±5Vp)
-Output voltage : 0 ~ 4.3V DC
- FT-23211A
1. RTD (PT-100)
-0°C : 100Ω , 100°C : 139.16Ω, (2)
-Rating : 250°C
- FT-23212A
1. Level (Water)
Simulation of the reservoir control status (motor included)
- FT-23213A
1. Fiber optic emitter
-Forward current, DC (lF) : 50mA
-Peak wave length : 950nm
-Output power : 50μw
2.Fiber optic phototransistor
-λpeak : 850nm
-Collect current (lC) : 50mA
-Power dissipation : 100mw
- FT-23214A
1. LVDT
(1).Range : ±5mm ,(2)
(1).Scale : 0.01mm,
(1).Optimum frequency : 50Hz ~ 1.1KHz (Nominal : 350Hz)
- FT-23215A
1. Rotation angle sensor
– 10 turns (3600°) precision potentiometer
– Linearity : ± 0.25%
List of Experiments:
1. D/A and A/D Converters
2. Characteristics of Sensors
3. Gas Sensors
4. AD590 Temperature Transducer
5. Hall Current Sensor
6. PT100 Temperature Sensor
7. Humidity Sensor
8. Strain Gauge
9. Linear Variable Difference Transformer (LVDT)
10. Proximity Switch
11. Infrared Transducer
13. Ultrasonic Transducer
14. Pressure Sensor
15. V/F and F/V Converters
16. CdS Cell
17. Level Controller
18. Fiber Optical Communication
19. Rotation Angle Senso
Accessories:
● Connecting wire 1 Set
● Power Cable: 01 nos
● User Manual 01 nos
A/D Converter : 1×12-bit ADC
-Input voltage range : 0 ~ +5V
-Time pulse frequency : 3.58 MHz
-Control signals : Status, pole, over range indication
