ARM-7061 Universal Arduino Microcontroller Trainer

-Best type Printed Sheet
-Hard Round Support Board or Plastic Sheet
-Safety Breaker
-Protection System
-Panel Box
-Best Structure
-Power Monitoring
-Use Connector

---

2. Working Area & Frame:
-Support System: Windows XP / Win 7 / Win 8 / Win 10 / Win 11 / Linux
-Working Area: 22.86 x 20.32 x 4 cm
-Frame Size: 76.2 x 62.23 x 4 cm

---

3. Arduino UNO Unit:
-Microcontroller: ATmega328P (8-bit AVR family)
-Operating Voltage: 5V
-Recommended Input Voltage: 7-12V
-Input Voltage Limits: 6-20V
-Analog Input Pins: 6 (A0 – A5)
-Digital I/O Pins: 14 (6 with PWM output)
-DC Current on I/O Pins: 40 mA
-DC Current on 3.3V Pin: 50 mA
-Flash Memory: 32 KB (0.5 KB for Bootloader)
-SRAM: 2 KB
-EEPROM: 1 KB
-Frequency Clock Speed: 16 MHz

---

4. Arduino Pro Mini Unit:
-Microcontroller: ATmega328P (8-bit AVR)
-Operating Voltage: 5V and 3.3V
-Raw Voltage Input: 5V to 12V
-Max Current on I/O Pin: 40mA
-Max Total Current: 200mA
-Flash Memory: 32 KB
-EEPROM: 1 KB
-RAM: 2 KB
-Clock Frequency: 3.3V @ 8 MHz, 5V @ 16 MHz
-Operating Temp: -40ºC to +105ºC

---

5. Arduino Nano Unit:
-Microcontroller: ATmega328P
-Operating Voltage: 5V
-Recommended Input Voltage (Vin): 7-12V
-Analog Input Pins: 6 (A0 – A5)
-Digital I/O Pins: 14 (6 with PWM)
-DC Current I/O Pins: 40 mA
-Flash Memory: 32 KB (2 KB Bootloader)
-SRAM: 2 KB
-EEPROM: 1 KB
-Clock Speed: 16 MHz
-Communication: I2C, SPI, USART

---

6. Arduino Mega Unit:
-86 Programmable IO Lines
-2x 8-bit Timers, 4x 16-bit Timers
-16-Channel 10-bit ADC
-4x USART
-SPI Interface
-Analog Comparator

---

7. Node MCU ESP8266 Unit:
-Microcontroller: Tensilica 32-bit RISC CPU Xtensa LX106
-Operating Voltage: 3.3V
-Input Voltage: 7-12V
-Digital I/O: 16
-Analog Input: 1
-Flash: 4MB
-SRAM: 64KB
-Clock: 80MHz
-USB-TTL CP2102 onboard
-PCB Antenna

---

8. Arduino Micro Unit:
-86 Programmable IO Lines
-2x 8-bit Timers, 4x 16-bit Timers
-16-Channel 10-bit ADC
-4x USART
-SPI Interface
-Analog Comparator

---

9. Node MCU ESP32 Unit:
-Microcontroller: Tensilica 32-bit RISC
-CPU Xtensa LX106
-Operating Voltage: 3.3V
-Input Voltage: 7-12V
-Digital I/O: 16
-Analog Input: 1
-Flash: 4MB
-SRAM: 64KB
-Clock Speed: 80MHz
-USB-TTL CP2102 onboard
-PCB Antenna

---

10. Node MCU ESP-01 / LORA Unit:
-Microcontroller: Tensilica 32-bit RISC CPU
-Xtensa LX106
-Specs same as ESP32 Unit

---

11. Additional Modules Unit:
-1.2″ 7 Segment LED Display
-8×8 Dot Matrix
-Keyboard Interface
-32-pin I/O Interface
-DC Motor Interface (L293)
-Stepper Motor Driver
-LCD 2×16 Interface Board (optional)
-10-LED Bar Graph
-Timer Module
-Serial Controller Connection
-I2C Communication
-PWM, Single Instruction Execution
-ADC (16-bit), DAC (0800)
-RTC DS3231 with Temp Sensor
-GSM SIM800L with Buck Module
-4-Digit 7 Segment Multiplexing
-Wireless: NRF, Bluetooth, ESP
-Ultrasonic Module, RF433MHz TxRx
-2-Channel Electromagnetic Switch
-Infrared Communication Module

---

Accessories & Others:
-Standard accessories.
-User manual: 1 Nos.
-Connecting Wire: 1 set.
-Warranty: 01 year.
-Training
-Experiment manual: 1Nos.
-Installation, Testing
-PNP & NPN Switch Modules
-Comparator Module
-ULN Series High Current Switch
-Power Monitor (Volt/Amp Display)
-Software, Source Code, User Manual Included

---

12. FT232RL USB to TTL Programmer Unit:
-Operating Voltage: 5V / 3.3V
-Max Current: 5V – 500mA; 3.3V – 50mA
-Connector: Mini USB
-EEPROM: 1024-bit
-Data Rate: 300 baud to 3 Mbaud
-Buffers: 128B (Rx), 256B (Tx)
-Integrated Clock, LED Indicators