ARM-7062 All Industrial Motor Control System (Stepper, Servo & Induction)

•         Best type Printed Sheet • Hard Round support board or Plastic

Sheet • Safety Breaker• Protection System

•         Panel Box • Best structure. • Power Monitoring • Use Connector

Motor-

•         1× SDF08NK8 Servo Drive • 1× 1KW 80F-0330TBL-Z AC

Servo Motor with brake • 1x DB25 hole plug and shell

•         1 x 3m Power Cable with Plug • 1 x 3m Encoder Cable with

Plug • Power: 1KW • Number of poles: 5 • Rated power supply:

220V • Rated speed: 3000r/min • Rated torque: 3.18Nm • Rated current: 5.4A • With brake: Yes

Parameters of the driver

•         Maximum current: 8.9A • Input voltage: AC170-253V

(50/60Hz) • Cooling method: radiating air cooling • Control

mode: SVPWM control • Encoder: 17-bit single-turn absolute

value optical encoder • Operating temperature: 0℃~+55℃•

Storage temperature: -20℃-80℃• Protection level: IP54

Industrial Stepper Motor (Close Loop) Stepper Motor:

•         Low noise. • Low heat. • Smooth operation. • Good acceleration performance. • Type: DSP Closed loop stepper

drive • Maximum peak current: 13A • Impulse response

frequency: 200KHz • Micro-stepping driver: 200~25600ppr •

Input Voltage: 24-80VDC • Protective function: Over voltage,

over current, tracking error, over proof • Signal input: Support

PUL/DIR and CW/CCW modes (difference) • Compatible:

4.5~28V signal (Don’t need a resistor) Flange: NEMA23 57MM

•         Step angle: 1.8 degree • Phase: 4PH Hold torque: 6NM •

Motor Length: 132MM • Rated Speed: 1000RPM • Encoder:

1000line • Resistance: 0.65ohm • Inductance: 4.5mH • Class of insulation:

Industrial Induction Motor (Single Phase):

•         Energy Efficient • Continuous running duty • Sealed ball bearing • Class F insulation • Dual enamelled copper wire •

CSIR/CSCR models • MCB & thermal protection in 100S

series • Easy change direction of rotation • High starting torque

•         230 V & 415V supply and 50 Hz frequency • Speed – 3000

RPM • Increased Efficiency • Vacuum Pressure Impregnation treated • ‘F’ Class Insulation • Totally Enclosed fan cover

Industrial Induction Motor (Three Phase):

•         Energy Efficient • Continuous running duty • Sealed ball bearing • Class F insulation • Dual enameled copper wire •

CSIR/CSCR models • MCB & thermal protection in 100S

series • Easy change direction of rotation • High starting torque

•         Number of Pole: 4 • 230 V & 415V supply and 50 Hz frequency • Speed – 3000 RPM • Power 1.5KW • Number of

Cable: 7.5 HP ~ 6 WIRES (Star Delta Starting) • Increased

Efficiency • Vacuum Pressure Impregnation treated • ‘F’ Class Insulation • Totally Enclosed fan cover

Thermal Printed Front pate

•         Size (42*34*6) inch, • Thickness: 21Gauge • Metal Type: SS & MS, • Print Colour: white Glazy, • Sheet number 22, • Storage Printed temperature 3000c, • Color White/Silver Machine Structure (Table & shelve type):

•         Size: 40Inch*32Inch, • SS & MS metal • Thickness: 18-gauge

3/4 pipe, • Number of Partition: 10

Multi section Back Cover Box (8mm):

•         Size (42*34*5) inch, • Thickness: 8mm • Metal Type: Acrylic

•         Color: Black & Blue.

Panel Meter (Voltage):

•         Meter Type: Digital • Current Range: (0-1000) V• Print

Colour: white & Black. • Display Type: 7-Seg • Display

Colour: RED & Blue

Panel Meter (Ammeter):

•         Meter Type: Digital • Current Range: (0-200) A• Print Color:

white & Black. • Display Type: 7-Seg • Display Color: RED &

Blue

Panel Meter (Watt):

•         Meter Type: Digital • Wattage Range: (0-2000) Watt• Print

Color: white & Black. • Display Type: 7-Seg • Display Color:

RED & Blue

Earth leakage Safety Breaker:

•         Human Body Sense safety • Current error detection range is

20mA • Soft tripping • Low noise cut off

K. Printed Circuit Board for Motherboard Specification: •

Type: Glass Fiber • Number of layers: 2 • Top silk Color: White

•         Green Masking Color: Blue

Gold type Connector with MM & MF Silicon Cable:

•         Cable type soft silicon • Current rating 100A • Voltage range

1000V • Female Connector Diameter 13mm • Male Connector

Diameter 4.5mm

Controller: DXP14XX211D:

•         Memory Flash: 128 MB • Memory RAM: 64 MB • Processor:

32Bit RISC CPU 400MHz • DC24V current output: 400mA •

Product Series: DXX Series • Number of Inputs: 12 • Input

Type: Digital • Number of Outputs: 6Transistor Output • 6

Analog Input • 4 Analog Output • Communication System:

Serial • standard MODBUS ASCII / RTU • Integrated high-speed counter: 20Khz • Output Type: TTL

Isolated I/O Exchange Control Touch Panel:

•         Panel size: (30x18x10) Inch. • Display Type: LED

• Display

Size: 154.08 x 85.92mm • Operation System: Delta Real-Time

OS • MCU: 32-bit RISC Microcontroller • SD RAM: 64Mbytes

•         Buzzer: Multi-Tone Frequency 2K ~ 4K • Hz85dB Backlight:

LED • Operation Voltage: DC +24V • Brightness (cd/m2):

300 • Contrast Ratio: 500:1 • Backlight Type: LED • Backlight

Life Time: >30,000 hrs. • Colors: 16MLCD • Viewing Angle

(T/B/L/R): 70/50/70/70 • Type: 4-wire Resistive Type • Accuracy: Active Area Length(X)±2%, Width(Y)±2%

Power Management System:

•         Type: SMPS MODE • Primary Output Voltage: 24V • Output

Current: 14.6A • Maximum Output Power: 350W • Family:

LRS-350 • Input Voltage: 90V to 132V, 180V to 264V • Input

Frequency: 47V to 63V • Maximum Input Current: 6.8A •

Output Connector Type: Screw Terminal Block • Number of

Outputs: 1 • Product Type: AC to DC Power Supply • Agency

Approvals: UL/CUL • Efficiency (%): 88 • Minimum Isolation

Voltage: 3000V • Operating Temperature-Min (Cel): -25 •

Operating Temperature-Max (Cel): 70 • Length (inch): 8.5

Relay Module:

● Coil Voltage: DC 24V & 220V ● Contact capacity: AC: 10A

220V ● Matching sockets available ● Contact resistance (mΩ):

≤50mΩ ● Insulation resistance (mΩ): ≥500mΩ ● Electrical life

(OPS): 100,000 times ● Mechanical life (OPS): 10,000,000 times ● Operating temperature: -40+70℃

Proximity Sensor (NPN & PNP):

● Outward appearance code:12mm ● Outward appearance code: Metal shell ● Detection distance: 4mm ● Working voltage: DC 6-36V ● Polarity: NPN/ NPN ● Dimension: 12 x

50mm

Photo Sensor (NPN & PNP):

● Voltage: DC 6-36V ● Current: 300m ● Head Diameter:

1cm/0.4̏ ● Body Size: 2 x 6cm/0.8̏ x 2.4̏ (Max. D*L) ●

Material Plastic, Alloy

Magnetic Contactor:

●Coil ratings: Characteristics for 200 VAC, 50 Hz / 200-220

VAC, 60 Hz

●Coil power consumption value is the same for a

coil that is not rated 200 VAC.

●Indicated operate/release times

for 200 VAC, 50 Hz. ●Closed and open voltages of 100 V coil

(100 VAC, 50 Hz/100-110 VAC, 60 Hz) are approximately one

half the values in the table above. ● Coil Current 100mA @

22oVAC ● Continuous Chanel current @ 30A ●Values in the table above are examples for 20°C cold condition.

Others:

(Cable, Nut bolt/Screw, Indicator, Switch, Holder, Power Cord,

Rocker Switch, MCB, MCB box, Connect Lax, Cable tie,

Reign, Lead, Plug, Socket, Fuse Holder, Masking Tape,

Electric Tape, Rubber Bush, MK Socket, CT, Terminal

Connector, Glugum/Stick etc)

Aluminum Chanel:

•         Sheet thickness 5mm • Sheet (Silver/white) • Square Shape

Others Construction, Installation, commissioning & Training with manual.

Installation:

Warranty: 01 (One) year warranty from the date of installation.

Installation   &         training:         Free    installation,   operation,

commissioning & maintenance training must be provided at the

PE laboratory site.

Manufacturer’s authorization Letter is: “required”.

Please note:

Manufacturer’s Authorization letter produced by the Original Manufacturer is required.

Original product catalogue, user manual or product description manual should be supplied by the supplier.